[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] Re: [fw1-wizards] VPN-1 against Cisco - problems
Morten You were correct about the reverse rule - I had a some rules hidden (masked) which I hadn't taken off - including the reverse network2-network1 (doh !) ;-) (I really need a holiday, or a few beers - or preferrably both) Even so, there is no seperate rule for Accept - just encrypt And this is working so I would say that you don't need a separate Accept rule (any comments ?) Tim Higgins "Morten Seeberg" To: <[email protected]> <morten@seebe cc: rg.dk> Subject: Re: [fw1-wizards] VPN-1 against Cisco - problems 07/09/00 11:47 > Just wanted to check something out:- > > We have a VPN connection which just says:- > > network1-network2-any-encrypt-long > > There is no accept line for this and no reverse of the above either. Should > we be having problems with this setup ? The way I see it, you should have a problem initiating contact from network2 to network1, but not the other way around. #********************************************************************** This message is intended solely for the use of the individual or organisation to whom it is addressed. It may contain privileged or confidential information. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message. All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of Hughes Network Systems Limited, including its European subsidiaries and affiliates. Hughes Network Systems Limited, including its European subsidiaries and affiliates accepts no responsibility for loss or damage arising from its use, including damage from virus. #********************************************************************** ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|