[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] VRRP Multicast over a VLAN
Hi all... I am trying to setup VRRP over a BayStack 350 Switch. I am not able to see the multicast when I conenct a sniffer to the same VLAN. Over the switch I can see the multicasts comnig from all the interfaces. I disabled the Spanning Tree over the switch. I have 2 IP440 with Monitor VRRP configuration. Everything works fine over a normal HUB. Appreciate your response... Haitham This message and any attachments are confidential to the ordinary user of the e-mail address to which it was addressed and may also be privileged. If you are not the addressee you may not copy, forward, disclose or use any part of the message or its attachments and if you have received this message in error, please notify the sender immediately by return e-mail and delete it from your system. Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, arrive late or contain viruses. The sender therefore does not accept liability for any errors or omissions in the context of this message which arise as a result of Internet transmission. Any opinions contained in this message are those of the author and are not given or endorsed by the SABB nor HSBC Group company or office through which this message is sent unless otherwise clearly indicated in this message and the authority of the author to so bind the SABB nor HSBC entity referred to is duly verified. ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|