[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] PPTP problem
I am trying to set up PPTP. I am putting down what I did (will do), can some one let me know if I am correct. Thanks. 1) Create a service PPTP-data; ip_p=47,[22:2,b]=0x880B 2) Create objects; PPTP Client (10net) and PPTP server (other side IP) 3) FW rule src dst service action (rule) PPTP client IP address (10.*.*.*) PPTP server (valid destination IP) TCP 1723 accept PPTP-Data (rule) PPTP server PPTP client same same same 4) router nat the 10net device to the our external IP going out and our external to 10net inside. 5) Should not need to nat it on the FW-1, correct? Any help would be greatly appreciated. Thanks. Joseph L. Cosgriff [email protected] ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|