[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] [FW-1] Address range problem
Address ranges can only be used in NAT rules and not in security policy rules. You will need to define the range of addresses as a network object (not address range) using the correct subnet masks etc. or as multiple workstation objects depending on how big the range is. Hope this helps, Regards, Paul Finlayson. -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Raed Al-Zoubi Sent: Wednesday, October 25, 2000 10:46 AM To: [email protected] Subject: [FW1] [FW-1] Address range problem Hello All, I have a strange problem , I am trying to use network range address in my Firewall-1 rules , I made a network object of Address ranges type . when I try to add this object to the into a rule it does not appear in the network objects that I should chose from , but when using mange network objects menu this network object " Address range " appear there. I am using Firewall-1 version 3.0b on Solaris platform. best regards and thnks in advance ---------------------------------------------------------------------------- - Raed Al-Zou'bi Systems Engineer Computer Center Jordan University of Science and Technology P.O. Box 3030 - 22110 Irbid - Jordan Phone : 962 2 7095111 ext. 23365 Mobile: 962 79 601339 Fax : 962 2 7095011 ---------------------------------------------------------------------------- ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|