[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] NAT question
this is how NAT is suppose to work. regards anil bhelkar [email protected] This communication is for the exclusive use of the intended receipient/s and shall not attach any liability on the originator. It may contain information which is confidential and legally priviledged and the same shall not be used or dealt with by any third party in whatsover manner. ----- Original Message ----- From: Rajesh Bandar <[email protected]> To: <[email protected]> Sent: Wednesday, November 01, 2000 9:50 AM Subject: [FW1] NAT question > > Hi, > > I am running Cgeckpoint Firewall ver 4.0 on a solaris 2.6 machine. I need to > configure NAT in such a way if anyone from our internal network accesses the web > server on DMZ, it (web server on DMZ) should see the source IP address. At the > same time if any one acceses internet from our internal network, destination > server should see only one IP (translated IP). Is it possible to configure. Any > help would be appreciated. > > Thanks, > Rajesh. > > > > ============================================================================ ==== > To unsubscribe from this mailing list, please see the instructions at > http://www.checkpoint.com/services/mailing.html > ============================================================================ ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|