[FW1] ...Packet is not IPSEC Sheme: IKE

[Amit Shani <ashani@FW1-NOSPAMrugged.com>]

Hi All

I am trying to configure a connection from the internet to a server on the LAN 
using session authentication agent. The server has a local IP and is 
Static-NATed To a vaild address. 
Everything works great until I try to implement encryption on the Session 
authentication rule.
Now, when I try to connect, the log shows these two lines:
.... Accept ..... ..... reason Authenticated by FireWall-1 Password
.... Reject ...... ..... encryption failure: Packet is not IPSEC Sheme: IKE
Both the user and the server are configured to use the same encryption.
The FW-1 object includes in it's domain the LAN and the NAT address of the 
server.

Config: FW-1v4.1sp0 On NT4sp5

Please Help.

THX



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================