RE: [FW1] Adding a second quad card to a Nokia IP440

["James C. Hanrahan" <jimh@FW1-NOSPAMINTRASYSTEMS.com>]

Andy:

You should just be able to install the card and boot up the system. The new interfaces will show up in voyager.

Depending on the device you have, you will have to go into the physical portion of the interface configuration and set the speed

and duplex modes. Make sure you go into the the firewall object and update the interfaces and anti-spoofing parameters as well.

 

While you upgrading the box, you may want to upgrade the IPSO to 3.3. There are some great new features.

 

Good luck,

Jimmy

 

 

-----Original Message-----
From: Fernandes, Andy (ANDF) [mailto:ANDF@nnpi.com]
Sent: Wednesday, January 03, 2001 2:12 PM
To: 'fw-1-mailinglist@lists.us.checkpoint.com'
Subject: [FW1] Adding a second quad card to a Nokia IP440

Hello:

 

I have just received a quad Ethernet card from our Nokia dealer for a Nokia IP440 Firewall. The Firewall is running Checkpoint 4.1sp-2 on IPSO 3.2 and has a single quad card currently installed. Is anyone aware of any issues regarding the installation of a second quad card on the Firewall? Is it a simple plug and play installation as the dealer seems to think?

 

The card came with no documentation and I could not find any documentation on the Nokia web site either.

 

Any hints would be highly appreciated.

 

Andy