[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [FW1] NAT Problem in CP-Firewall
What architecture is the Firewall on? Did you add a host specific route and
an arp entry?
Marc Jacquard
SR. Systems Engineer
Fujitsu America, INC.
Hilo Office
email: [email protected]
Telephone:Pager:-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Jey
Baskar
Sent: Friday, January 12, 2001 11:02 AM
To: [email protected]
Subject: [FW1] NAT Problem in CP-Firewall
Hello,
We have installed Checkpoint Firewall-1 in our environment. I am facing a
problem of unable to PING to the NATted address.
10.1.3.15 205.148.243.2 205.148.243.1
HOSTA ------- FIREWALL -------- ROUTER ---------- INTERNET
I have a hostA 10.1.3.15 which is on the internal network. It can ping to
the Firewall [205.148.243.2] and to the router [205.148.243.1]
without any problems.
On the Firewall I have static Address Translation for the 10.1.3.15 and set
it as 205.148.243.3
The problem is I can PING to the firewall [205.148.243.2] successfully from
the internal and external network but CANNOT ping to the static address
[205.148.243.3] either from the internal nor from the external network. Even
from the Firewall server, I CANNOT ping to the NATed address [205.148.243.3]
I have set the NAT and rules properly.
Any help to fix this problem will be greatly appreciated!
Thanks
Jey
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================