[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [FW1] Late collisions during VRRP transition.
Sounds like a duplex mis-match.
Be sure to manually set both devices.
On Tue, 30 Jan 2001, Dave Dunaway (ncc0296) wrote:
>
>
> Hi folks,
>
> I've been messing around with my IP650's and testing VRRP failover
> In my case the Nokia's are hooked into a pair of cat6509's.
>
> When the primary firewall drops off the face of the earth, the failover
> will then get a wack load of late collisions on its port and the cat6509
> will then disable the port, thus the VRRP transition doesn't occur.
>
> Now I know late collisions means your ethernet segment is too long and
> blah blah blah, but this isn't the case. I've even swapped cables. No
> change in situation.
>
> Anyone notice behavior like this? I'm not a cisco dude so if there's
> something on the cat6509 I can tweak...speak up! :)
>
> TIA.
>
>
--
--Paul
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================