Re: [FW1] Date: Mon, 12 Feb 2001 10:51:50 -0500

["Larry Pingree" <larry@FW1-NOSPAMsiegeworks.com>]

The problem is most likely that he needs to go into voyager and delete
unused packages that he has already upgraded from. Also, I beleive that you
may want to try moving log files etc out of var, its a bit full. Also refer
to the following resolutions in the Nokia Knowledge Base:

Resolution 1517
Resolution 1285
Resolution 953


Optionally, you may fix it by re-building the Nokia box entirely but this is
quit involved and not a guarentee.


----- Original Message -----
From: Brian Mulford <BMulford@colesys.com>
To: Check Point FW List (E-mail)
<fw-1-mailinglist-digest@lists.us.checkpoint.com>
Sent: Monday, February 12, 2001 7:52 AM
Subject: [FW1] Date: Mon, 12 Feb 2001 10:51:50 -0500


>
> I have a nokia ip 440, running checkpoint 4.0. The client told me that
> they had tried to do the upgrade but couldn't due to disk space
> limitations (something about the nokia box being partitioned wrong) I
> ran the following at the command prompt. Can anyone decode this for me?
>
> ncf[admin]# du
> 2957    ./p3078
> 4925    ./p3078old
> 22882   ./nk320/nk320-v4-3des-ssh
> 49427   ./nk320
> 2       ./.ssh
> 57326   .
> ncf[admin]# df -k
> Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
> /dev/wd0f4  1024381     7%    /
> /dev/wd0a       49231       38    45254     0%    /config
> /dev/wd0d01   129542    65%    /var
> /dev/wd0e       98479    20656    69944    23%    /opt
> procfs              4        4        0   100%    /proc
>
>
> I have 2 questions. Do I have room to upgrade them to the latest Ipso
> release (currently they are on 3.2.1).
> do i have room to do the upgrade from 4.0 to 4.1?
>
> Are there other commands that I need to run to check the disk space?
>
>
> Thanks in advance.
>
> Brian
>
>
>
============================================================================
====
>      To unsubscribe from this mailing list, please see the instructions at
>                http://www.checkpoint.com/services/mailing.html
>
============================================================================
====
>



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================