[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] Xwindow application through CP 4.1 SP4
Has anyone out here had any luck getting Xwindows to work reliably through Checkpoint 4.1 SP 4 and a Nokia IP440 and Secure Remote. I can get a window to open up, however, when you issue a command that would fill the screen with output, the window freezes. I also can not get the simplest X based GUI to open at all, they always time out. Checkpoint had me disable flows, and convert my mtu size on my servers to 1450. They are saying that layering encryption over a 1500 byte frame is what is screwing it up. This helped, Xwindows don't freeze, but GUI's still will not open. I didn't really like this idea anyway, since all Ethernet switches, routers and hubs are tuned to use the mtu of 1500. I'm just wondering if anyone has had success with this. BTW: I am trying Exceed on Demand, which works much better, but the particular Xapp I need to run doesn't work with EOD. Thanks in advance!! Mike Carroll System Administrator Chiaro Networks Ltd. [email protected]****************************************************************** This e-mail and any files transmitted with it are the property of Chiaro Networks, Ltd., and may contain confidential and privileged material for the sole use of the intended recipient(s) to whom this e-mail is addressed. If you are not one of the named recipient(s), or otherwise have reason to believe that you have received this message in error, please notify the sender and delete all copies from your system. Any other use, retention, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. ****************************************************************** ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|