Yes I did. If I disable the scheme the error is rather sth like "FW1
password authentication not enabled".
It really looks somethnig so trivial, but I don't seem to get it working
grrr
Many Thanks,
Hi.
In ver. 4.0, user authentication is
activated by default, but in ver 4.1 you must activate this method. Have you
activated in your firewall object the user authentication
scheme?
Manel.
Hi,
I am currently recreating a 4.0 configuration on a 4.1sp3 fw1.
source: websitevisitors@Any (user
authentication)
service: http
action: User Auhentication
with FW1 passwords
On the browser end I get the error:
Authorization is needed for FW-1. The authentication
required by FW-1 for visitor is: FW-1
password. Reason for failure of last attempt: FW-1
rule
This setup worked perfect with the 4.0 configuration, but I can't get it
going with the 4.1sp3.
The 4.1sp3 is a new machine, not an upgrade of the previous config.
Any ideas are welcome!
Thx,
patrick
***************************************************************************
DISCLAIMER: Este mensaje contiene información propietaria
de la cual parte o toda puede contener información confidencial o
protegida legalmente. Esta exclusivamente destinado al usuario de
destino. Si, por un error de envio o transmisión, ha recibido este mensaje
y usted no es el destinatario del mismo, por favor, notifique de este
hecho al remitente. Si no es el destinatario final de este mensaje no debe
usar, informar, distribuir, imprimir, copiar o difundir este mensaje
bajo ningún medio.
DISCLAIMER: This e-mail contains propietary information
some or all of which may be legally privileged. It is for the intended
recipient only. If an addressing or transmission error has misdirected
this e-mail, please notify the author by replying to this e-mail. If you are
not the intended recipient you must not use, disclose, distribute, copy,
print or rely on this e-mail.
***************************************************************************
|