[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1] Checkpoint FW1 v4.1 and Windows 2000 Advanced Server
I had
this problem when I tried to install CP on 2k:
What i
found is that the OS tries to boot and sees no connection on the NICS, thus 2k
does not load the nics if there are no connections (in DOS, ipconfig gets "cable
disconnected). FW tries load on boot and has no nics loaded, thus no
license will install. Try booting your machine and opening DOS and typing
"fwstart" to make sure fw started. Also, do Ipconfig to make sure 2k has
nics loaded. The way i got this work (this was only in test environment
though) was to place loopback cables in the nics so 2k would recognize
connection upon boot.
Hope
this helps...
I'm
experiencing the same problem..But after reinstalling the error still
occurrs..BTW, it's FW-1 SP4..
|