[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1] StoneSoft Full Cluster and FW-1 crashes at boot with alias interface
do you have solved your problem? do you have enabled the state synchronization between the fw-modules after adding the sbif accept line in the file idfev? bye andre > -----Original Message----- > From: Brian Carroll [mailto:[email protected]] > Sent: Monday, January 07, 2002 11:40 PM > To: [email protected] > Subject: [FW-1] StoneSoft Full Cluster and FW-1 crashes at boot with > alias interface > > > Firewall-1 4.1 SP5 > StoneSoft's FullCluster 2.0 SP5 > Solaris-8 (kernel patch level and qfe drivers match > Stonesoft's recommendations) > E220R with single 450mhz proc > > If I configure one interface for the internal LAN in the > manner described in the Stonesoft manual, i.e. use a > dedicated IP on the "main" interface (qfe4, 172.17.62.90) and > the virtual IP on an alias interface (qfe4:1, 172.17.62.92), > my install crashes. It crashes with a message: > > Panic CPU 0 thread=705 Bad Trap Type=31 occurred in module > qfe due to a NULL pointer deference > > > The interfaces are both defined in the firewall-1 objects. > The "sbif accept" mod to /etc/fw.boot/ifdev has been done. > Remove the alias and it boots OK. > > Any help would be greatly appreciated. > > Brian > > ================================================= > To set vacation, Out Of Office, or away messages, > send an email to [email protected] > in the BODY of the email add: > set fw-1-mailinglist nomail > ================================================= > To unsubscribe from this mailing list, > please see the instructions at > http://www.checkpoint.com/services/mailing.html > ================================================= > If you have any questions on how to change your > subscription options, email > [email protected] > ================================================= > ================================================= To set vacation, Out Of Office, or away messages, send an email to [email protected] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [email protected] =================================================
|