If I do a fw dbexport -f /tmp/users; fwstop; fw
dbimport -r -m -f /tmp/users; fwstart The fwm no longer binds to port
18190
A cpstat mg reveals
Product Name: Check Point Management
Server Major version: 5 Minor version: 0 Build number:
52085 Is started: 0 Active status: N/A
If I then do a fw kill fwm; fwm -d It comes back
with the below error
[FWM 637]@myfw resolver_gethostbyname: Performing
gethostbyname for localhost
[FWM 637]@myfw peers addresses are [FWM
637]@myfw 192.168.1.1 [FWM 637]@myfw sic_client_do_connect: using server
local sic name. [FWM 637]@myfw fwobj_obj_initmode: MGR R/W NEW mode [FWM
637]@myfw raise_file_limit: raising limit from 256 to 1024 [FWM 637]@myfw FW
Cleaner: Adding cleanup function FwmDestroyOpsecEnv() (0x15 c828,
0x0) [FWM 637]@myfw fwa_db_init: called [FWM 637]@myfw
fwobj_destroy_reference_hash: reference_resolving_hash_users<0
[FWM 637]@myfw
fwobj_destroy_reference_hash: reference_resolving_hash_users<0
[FWM 637]@myfw Did not load netobj for
objsym [FWM 637]@myfw use_omi is set to off Illegal
Instruction
It should have looked like
[FWM 546]@myfw resolver_gethostbyname: Performing
gethostbyname for localhost
[FWM 546]@myfw peers addresses are [FWM
546]@myfw 192.168.1.1 [FWM 546]@myfw sic_client_do_connect: using server
local sic name. [FWM 546]@myfw fwobj_obj_initmode: MGR R/W NEW mode [FWM
546]@myfw raise_file_limit: raising limit from 256 to 1024 [FWM 546]@myfw FW
Cleaner: Adding cleanup function FwmDestroyOpsecEnv() (0x15 c828,
0x0) [FWM 546]@myfw fwa_db_init: called [FWM 546]@myfw
fwobj_destroy_reference_hash: reference_resolving_hash_users<0
[FWM 546]@myfw
fwobj_destroy_reference_hash: reference_resolving_hash_users<0
[FWM 546]@myfw Did not load netobj for
objsym [FWM 546]@myfw use_omi is set to off [FWM 546]@myfw
CVersioningDB::ReadDBFile : Failed to
open /opt/CPfw1-50/conf/ db_versions/database/versioning_db.fws file for
reading, generates a new set. [FWM 546]@myfw CVersioningDB::FileModified:
Error >> Failed to get files modi fication time. [FWM 546]@myfw
peers addresses are [FWM 546]@myfw 192.168.1.1 [FWM 546]@myfw peers
addresses are [FWM 546]@myfw 192.168.1.1 [FWM 546]@myfw Primary Management
Object already exists - just checking for n ew CP products
installed [FWM 546]@myfw Internal CA object already exists - nothing to
do
This was initially tried where users were added in
the /tmp/users file in between, but since I hit this problem I went back to
an import of what it has so as I could verify that my additions weren't in
error.
I've googled a fair bit on this and have come
across other people who have had similar problems but no
solutions.
Anybody come across this before or know of any
solutions ?
Uly
|